Frigidaire Code H1 Troubleshooting

Want to do Frigidaire Code H1 Troubleshooting? All modern Frigidaire fridges have a built-in computer system that monitors and controls various fridge functions. Code H1 is an error code that indicates a problem with the fridge’s evaporator fan motor. If your Frigidaire fridge displays the Code H1, it means that the evaporator fan motor has failed or is not working correctly.

Before you attempt any troubleshooting or repairs on your Frigidaire fridge, it is important to first unplug it from the power outlet and allow it to cool down for at least an hour.

This will help prevent further damage or injury from occurring due to excess heat.

What Does h1 Mean on a Frigidaire Fridge?

HI is shown in the display of your Frigidaire fridge when there is a problem with the evaporator fan motor. This error code indicates that this component has failed or is not working correctly.

The temperature sensed by the thermistor is higher than normal, and that indicates that the fridge is cooling properly.

Refrigerator With Fruits And Vegetables Open Refrigerator Filled With Fresh Fruits And Vegetable refrigerator door stock pictures, royalty-free photos & images

How to Fix Code H1 on a Frigidaire Fridge

There are several possible causes for Code H1 on your Frigidaire fridge.

Closing the Door

First, check to make sure that the fridge door is completely closed. If the door is not closed properly, it can cause the evaporator fan motor to fail.

See also  Maytag Refrigerator Control Panel Reset: How To Do?

If the door is closed but the Code H1 persists, try resetting the fridge by unplugging it from the power outlet for at least five minutes. Once the fridge has been reset, try opening and closing the door to see if the Code H1 goes away.

In the case of deformed door seals, they will need to be replaced in order to properly close the fridge door.

Not overload the refrigerator with food

Another possible cause of Code H1 is overloading the fridge with food. When the fridge is overloaded, it can cause the evaporator fan motor to fail.

To fix this, simply remove some of the food from the fridge and try resetting it again.

Try to re-arrange the foodstuffs inside the fridge

If the fridge is not overloaded but the Code H1 persists, try rearranging the food inside the fridge. This will help improve air circulation and prevent the evaporator fan motor from failing.

Resetting the alarm

In some cases, the Code H1 may be caused by a faulty interior alarm. Try resetting the fridge’s internal alarm system to see if this fixes the problem.

The alarm starts beeping when there is a problem with one

of the fridge’s sensors, so resetting it may fix the Code H1 error.

To turn off the beeping h1 alarm, press and hold the “Alarm” button for five seconds.

Defrosting accumulated ice

In some cases, the Code H1 may be caused by excessive amounts of ice buildup on the evaporator fan motor. To fix this, you will need to defrost or clean out the fridge’s evaporator compartment and fans.

See also  Kitchenaid Refrigerator Model Numbers: What Do They Mean?

Be sure to unplug the fridge before starting any repairs or cleaning, and wear proper safety gear such as gloves and goggles.

If the evaporator fan motor is completely frozen, you may need to replace it.

What Causes a Frigidaire Refrigerator to Beep h1?

There are several possible causes of a Code H1 error on your Frigidaire fridge. Some of the most common causes are listed below.

  1. Evaporator Fan Motor Failure: The evaporator fan motor is responsible for circulating air throughout the fridge. If the evaporator fan motor fails, it will cause the Code H1 error to be displayed.
  2. Evaporator Fan Motor Not Working Correctly: If the evaporator fan motor is not spinning correctly, it may be due to a faulty or damaged circuit board.
  3. Fridge Defrosting Issue: The fridge’s defrost cycle helps keep coils in the back of the unit free from ice and frost buildup, which can cause overheating and other issues. If there is a problem with the defrost cycle, it can cause the evaporator fan motor to fail.
  4. Dirty Evaporator Coils: The evaporator coils are located in the back of the fridge and help remove heat from the air inside the fridge. If these coils become dirty or blocked, it can cause the evaporator fan motor to fail.
  5. Temperature overload: The temperature sensors in the fridge may stop working correctly if the fridge overheats. This can be caused by a number of factors, such as a build-up of ice or frost in the fridge, or a problem with the defrost cycle.
  6. Faulty door: If the fridge door is not sealing correctly, it can cause warm air to enter the fridge and make the temperature sensors think the fridge is too hot. This will cause the Code H1 error to be displayed.
  7. Condenser coils blocked: The condenser coils are located near the back of the fridge and help remove heat from the air inside the fridge. If these coils become blocked or dirty, it can cause the evaporator fan motor to fail.
  8. Faulty temperature alarm: A faulty temperature alarm may be the reason behind the Code H1 error. A faulty temperature sensor can also cause this issue.
See also  GE Refrigerator Ice Maker Reset: How To Do

      9. Faulty Thermistor: The thermistor is a temperature-sensing device located inside the fridge. If this component fails, it can cause the Code H1 error to be displayed.

  1. Bad defrost timer: The defrost timer controls the defrost cycle of the fridge. If this component fails, it can cause the evaporator fan motor to fail.

Final Thoughts – Frigidaire Code H1 Troubleshooting

A Code H1 error on your Frigidaire fridge can be frustrating and confusing. To fix this issue, it is important to identify the underlying cause of the problem. Some possible solutions include resetting the alarm, defrosting accumulated ice, and cleaning or replacing the evaporator fan motor.

However, in some cases, you may need to replace other components, such as the defrost timer or thermistor.

If you are unsure of how to fix the problem, it is always best to consult a professional appliance repair technician. Thanks for reading!

Today's Deals