Sub Zero 700br Not Cooling? Well, Sub-Zero refrigerators are known for their durability and performance, but like any appliance, they can occasionally have problems.
If your Sub-Zero fridge is not cooling properly, there are a few things you can check before calling a repairman.
What to Do If Sub Zero Refrigerator is Not Cold Enough
A malfunction or part failure in your Sub-Zero refrigerator can cause the unit to stop cooling properly. If this happens, check the following items:
#1. Check for Sub Zero Error Codes
Your Sub-Zero refrigerator will display an error code on the control panel if there is a problem. The error code will tell you what parts need to be checked or replaced.
If you see an error code, refer to the Sub-Zero service manual for troubleshooting instructions.
#2. Refrigerator Temperature Is Set Too High
If the refrigerator temperature is set too high, it will not cool properly. Check the refrigerator temperature setting and adjust it as needed. For proper cooling, the refrigerator should be set between 35° and 40°F.
To adjust the refrigerator temperature, press the “Refrigerator” button on the control panel. Use the + and – buttons to set the temperature to 35°F. It may take a few hours for the fridge to reach this temperature.
#3. Air Filters Are Dirty
The air filters in your Sub-Zero fridge remove impurities from the air inside the unit. If the filters are dirty, they can’t do their job properly and the fridge will not be able to cool properly.
To clean the air filters, remove them from the fridge and wash them with warm, soapy water. Rinse the filters well and let them dry completely before putting them back in the fridge.
#4. Evaporator Coils Are Dirty
The evaporator coils are located in the back of the fridge. They remove heat from the air inside the fridge and are essential for proper cooling.
If the evaporator coils are dirty, they won’t be able to remove heat properly and the fridge will not be able to cool properly.
To clean the evaporator coils, unplug the fridge and remove the back panel. Vacuum the coils with a brush attachment to remove any dust or dirt.
#5. Door Not Closing Properly
If the door is not closing properly, air can escape and the fridge will not be able to maintain a proper temperature.
Check the door gasket to make sure it is clean and free of debris. Also, check that the door is closing evenly and the latch is engaging properly.
If the door gasket needs to be replaced, contact a Sub-Zero service technician.
#6. Refrigerator Is Out of Level
If the refrigerator is not level, it can cause doors to not close properly and prevent the fridge from cooling properly.
To level, the fridge, place a level on the top shelf of the fridge. Adjust the leveling legs until the fridge is level.
#7. Location Is Affecting the Cooling Capacity
If the fridge is located in a hot, humid area, it can affect the cooling capacity.
Move the fridge to a cooler, less humid location if possible. If not, consider adding a separate air conditioner to cool the area where the fridge is located.
Even when the fridge is properly cooled, you should still check the food inside for signs of spoilage. If you find spoiled food, throw it away and clean the fridge thoroughly.
#8. Electric Supply Is Faulty
If the fridge is not getting power, it will not be able to cool properly.
Check the power cord and plug to make sure they are not damaged. Also, check the circuit breaker or fuse box to make sure the power is on.
#7. Create More Space for Air to Circulate
If the fridge is crowded, there may not be enough space for air to circulate. This can prevent the fridge from cooling properly.
Remove any items that are blocking the vents inside the fridge. Also, make sure the doors can open and close properly.
Take a look at your owner’s manual.
It should have a section on troubleshooting common problems. If you can’t find the manual, you can usually download it from the Sub-Zero website.
Although all refrigerators have common functions and features, each brand has its own quirks and special features. It’s important to know how your fridge works so you can properly maintain it and troubleshoot problems.
Could my refrigerator be overloaded?
An overloaded refrigerator can cause the compressor to overheat and shut off. This can damage the compressor and prevent the fridge from cooling properly.
To prevent this, don’t overload the fridge and make sure there is enough airflow around the compressor.
Why is the temperature control setting on my refrigerator wrong?
If the temperature control setting is off by even a few degrees, it can cause the fridge to not cool properly.
To fix this, adjust the temperature control until it is set to the correct temperature.
Is it worth it to repair a refrigerator?
The cost of repairing a refrigerator can vary depending on the problem. In most cases, it is cheaper to replace the fridge than to repair it.
However, if the fridge is new or under warranty, it may be worth it to repair the unit.
When should I replace my refrigerator?
A good rule of thumb is to replace your fridge every 10 years. However, this can vary depending on the brand and quality of the fridge.
If your fridge is more than 10 years old, it may be time to start shopping for a new one.
What are some signs that my refrigerator is not working properly?
Some common signs that your fridge is not working properly include food spoiling, warm air coming from the fridge, condensation on the inside of the fridge, and the fridge making strange noises.
If you notice any of these signs, it’s time to troubleshoot the problem.
Final Thoughts – Sub Zero 700br Not Cooling?
A refrigerator is a big investment, so it’s important to take care of it. By properly maintaining your fridge and troubleshooting problems, you can extend its lifespan and keep it running smoothly.
In this article, we’ve covered some of the most common refrigerator problems and how to fix them.
Hope this helps!
