Simple Solutions When a Whirlpool Refrigerator Isn’t Getting Cold
While there are instances why your Whirlpool fridge isn’t cooling? It usually boils down to one of the following:
1. Refrigerator Temperature Not Set Correctly
If you don’t know how to set the temperature on your Whirlpool fridge, it can potentially cause the appliance not to cool correctly. Not all models are the same, so it’s important you consult your user manual on how to set the fridge temperature.
There are generally two ways to set the fridge temperature:
- By using the control panel located on the outside of the fridge.
- By using an app if your fridge is connected to Wi-Fi.
2. Condenser Coils Need Cleaning
When your condenser coils are dusty, it can prevent the refrigerator from cooling properly. The coils are located at the back of your Whirlpool fridge, and you can easily clean them yourself.
Start by unplugging the appliance to avoid potential electric shock. Remove the covers on both sides of the fridge using a screwdriver or wrench and vacuum the coils with a brush attachment.
After you’ve vacuumed the coils, replace the covers and plug the fridge back in.
If you don’t feel comfortable cleaning the coils yourself, you can always hire a professional to do it for you.
3. The Door Was Left Open
It sounds like a no-brainer, but one of the most common reasons a fridge stops cooling is because the door was left open. If the door was left open for an extended period of time, it can cause the fridge to work harder to cool down, which can potentially lead to a breakdown.
To avoid this from happening, make sure you check that the door is properly closed whenever you turn the fridge back on.
4. Excessive Amount of Food Placed Inside Fridge
If you try to stuff too much food inside the fridge, it can impede the airflow and prevent the fridge from cooling properly. When this happens, it puts extra strain on the appliance and can cause it to break down.
To avoid this problem, make sure you allow enough space between each item of food so that air can circulate properly.
5. Faulty Refrigerator Door Gaskets
If your fridge door gaskets are damaged, it can cause cool air to escape and warm air to enter the fridge. This can make it harder for the appliance to maintain a consistent temperature, which can eventually lead to a breakdown.
To check if your gaskets are damaged, close the fridge door on a piece of paper. If you’re able to pull the paper out, it means that cool air is escaping and you need to replace your door gaskets.
6. Broken Refrigerator Component
There are instances where the problem can be more serious, such as a damaged compressor or faulty fan. If you suspect that your fridge has a more severe problem, it’s best to call an appliance repair service like Appliance Repair Pros within the Fort Worth area to take a closer look at your fridge. These parts are often responsible for cooling issues:
Compressor – The compressor is responsible for pumping refrigerant through the fridge. If it’s not working properly, it can cause the appliance to not cool correctly.
Fan – The fan helps circulate air around the fridge. If it’s not working, the fridge will struggle to maintain a consistent temperature.
Defective start relay – A defective start relay can cause the compressor to not start. This can prevent the fridge from cooling properly.
When Your Whirlpool Refrigerator Just Won’t Turn On
If your fridge won’t turn on at all, it could be something as simple as a blown fuse or tripped circuit breaker. Make sure you check that all your electrical connections are tight and that the fridge has power before assuming it’s something more serious.
Whirlpool Refrigerator Popping noise
A popping noise coming from your fridge can be caused by a few different things. One possibility is that the fan blades are hitting something as they rotate. Another possibility is that the compressor is starting to fail.
If you hear a popping noise coming from your fridge, it’s best to call an appliance repair service like Appliance Repair Pros so that a professional can take a closer look at your fridge.
Whirlpool Refrigerator Tripping Breaker
A fridge can trip a breaker if it’s overloaded or if there’s a problem with the appliance. If your fridge is tripping your breaker, make sure you unplug the appliance and check for any signs of damage. Once you’ve done that, you can plug the fridge back in and see if it trips the breaker again.
If the fridge does trip the breaker a second time, it’s best to call an appliance repair service.
Why is my Whirlpool refrigerator freezing my food?
There are a few possible causes for this problem. If the temperature inside your fridge is set too low, it can freeze food that’s placed at the back of the fridge. This can be caused by a faulty thermostat or compressor.
To fix this issue, use a vacuum to remove any dust that has accumulated around the vents inside your fridge. You should also check and adjust the temperature of your fridge, making sure it’s set at an appropriate level.
Whirlpool refrigerator drain pan overflow
If your refrigerator has a drain pan, it’s possible for it to overflow. This can happen if the drip tray has become clogged or full of debris. If you notice that water is collecting inside the fridge, check your drip tray and make sure there are no obstructions in the way before trying to fix this issue.
You can also read: How To Do A Oven Kitchenaid Over Temperature Reset
Final Thoughts – Whirlpool Refrigerator Cooling Off
If your Whirlpool fridge isn’t working correctly, it’s important to take action right away. A broken fridge can cause a lot of food to go to waste and can be a huge inconvenience.
The good news is that most fridge problems can be fixed without having to replace the entire appliance. By troubleshooting the issue and taking the right steps, you should be able to get your fridge up and running in no time.
